rope marker cm5b

ROPE MARKER
CM5/B


Machine for measuring, marking, and cutting ropes



pdf




01 clipping machines inactive
02 net testing inactive
03 net sewing inactive
04 rope machines inactive
05 zip fastener inactive
06 dryer inactive

Our Buraschi Rope Marker CM5/B is a special machine allowing to make measurements, two-colour staining and hot cutting the ropes both straight and oblique, with great precision.

The Buraschi Rope Marker CM5/B can be used for mooring or however big size rope up to 50/60 mm (1.97 in up to 2.36 in) and allows, thanks to a software program, to record and store a wide range of these executions and automatically repeat them as many times as you want. The cuts are made with absolute precision (accuracy 1%), and in a short time you will lower your working time considerably. You will also avoid different and inaccurate outcomes of measuring, marking and cutting your ropes. Equipped with wheels, the Buraschi Rope Marker CM5/B can be moved wherever it is needed in your plant. It is perfectly able to work with coils and to continue working at the end of the coil with a simple splicing with the new coil without losing data, and maintaining the accuracy 1% and precision of the work program to be executed.

The Buraschi Rope Marker CM5/B is easy to use and once you have started the program you have chosen, it works without the need for an operator. When the program ends a beeping sound will alert you to proceed with a new execution of your choice. The BURASCHI two-colour staining process will allow you to easily identify the various pieces to be cut, cutting them in large quantities as needed and making inventories of various sizes cut. This saves time and labour costs. And it is all done with absolute precision! Moreover, the Buraschi Rope Marker CM5/B allows to easily establish a precise program for each type of order to perform and to store the file for any order. Programs can then be loaded to repeat the process as needed.

ROPE PROCESS TIME
We have done some trials and following are the related process time which will give you an idea about the performance of the machine.
No operator is needed during the working cycle.
The test was made on twisted rope of 50 mm polysteel.

• How long does it take to measure one rope 20 m long and to add 6 marks with single colour on each piece?
Time needed 96”
• How long does it take to measure one rope 5 m long and to add 6 marks with single colour?
Time needed 44”
• How long does it take to measure one rope 30 m long?
Time needed 100”

TECHNICAL DATA
• Transmission pulley and brake
• Powered pulley toothed wheels jagged teeth to better help the traction
• Idle pulley for pneumatic contrast
• Electronic meter with instrument for setting marking cycles
• Inerasable bicolors marker
• Rope feeding adjustable speed
• Silent air compressor
• Rope end sensor
• Frame with locking feet and wheels
• Hot cutter system and smoke vacuum
• PC panel
• Voltage: 220 - 240 V single phase
• Synchronized coil unwinder able to work with heavy ropes 50-60 mm. (1.97-2.36 in)

rope marker

rope marker


Videos

PC PANEL

rope marker cm5b


MARKING SYSTEM

rope marker cm5b


CUTTING SYSTEM

rope marker cm5b


SILENT AIR COMPRESSOR

rope marker cm5b


SYNCRONIZED UNWINDER

rope marker cm5b


NO MORE

rope marker cm3b